Product Filter

Showing all 8 results

Show

    • CF W3 

      Super fluid epoxy resin for impregnation of DCI Wrap with “wet system”

      PRODUCT IDENTITY
      Component A Component B
      Consistency: liquid liquid
       

      Color:

      transparent yellow transparent yellow
      Specific gravity (g/cm³): 1.12 1
      Brookfield viscosity (mPa·s): 380 (shaft 1 – rev. 5) 50 (shaft 1 – rev. 50)

      Super fluid epoxy resin for impregnation of DCI Wrap with “wet system” ...

    • CF W200

      CF W-200 is a unidirectional carbon fiber fabric characterized by its high modulus of elasticity (252,000 ± 2% N/mm²) and high tensile strength.

      Product identity
      Type of fiber: ultra high-strength carbon
      Appearance: unidirectional fabric
      Weight (g/m²): 1,200
      Equivalent thickness of dry fabric (mm): 0.666
      Load-resistant area per unit of width (mm²/m): 666.4
      Tensile strength (N/mm²): ≥ 4,900
      Maximum load per unit of width (kN/m): > 3,265
      Tensile modulus of elasticity (N/mm²): 252,000 ± 2%
      Elongation at failure (%): ≥ 2

      CF W-200 is a unidirectional carbon fiber fabric characterized by its high ...

    • CF W2

      Super fluid epoxy resin for impregnation of DCI Wrap with “wet system”

      PRODUCT IDENTITY
      Component A Component B
      Consistency: liquid liquid
       

      Color:

      transparent yellow transparent yellow
      Specific gravity (g/cm³): 1.12 1
      Brookfield viscosity (mPa·s): 380 (shaft 1 – rev. 5) 50 (shaft 1 – rev. 50)

      Super fluid epoxy resin for impregnation of DCI Wrap with “wet system” ...

    • CF W300

      This system is recommended for repairing reinforced concrete members and masonry damaged by physical-mechanical stresses,

      Product identity
      Type of fiber: ultra high-strength carbon
      Appearance: unidirectional fabric
      Weight (g/m²): 1,800
      Equivalent thickness of dry fabric (mm): 0.999
      Load-resistant area per unit of width (mm²/m): 999.4
      Tensile strength (N/mm²): ≥ 5,900
      Maximum load per unit of width (kN/m): > 3,995
      Tensile modulus of elasticity (N/mm²): 344,000 ± 2%
      Elongation at failure (%): ≥ 3

      This system is recommended for repairing reinforced concrete members and ma...

    • Epo flat ST

      Epoxy primer specific for the Wrap system for structural strengthening

      Product identity
      component A component B
      Consistency: thick paste thick paste
      Colour: grey white
      Density (kg/l): 1.72 1.55
      Brookfield viscosity (Pa·s): 900 (rotor F – 5 revs) 600 (rotor D – 2.5 revs)

      Epoxy primer specific for the Wrap system for structural strengthening P...

    • CP 4000

      Pultruded carbon fiber plate with a double plastic protective film

      Product identity
      Matrix: epoxy resin
      Reinforcement: high resistance carbon fibers
      Color: black

      Pultruded carbon fiber plate with a double plastic protective film Produ...

    • Epo primer ST

      Thixotropic epoxy putties for leveling concrete surfaces and for structural bonding

      Product identity
      Component A Component B
      Consistency: liquid liquid
      Color: transparent yellow transparent yellow
      Density (g/cm³): 1.12 1.05
      Brookfield viscosity (mPa·s): 350 (shaft 1 – rev. 5) 50 (shaft 1 – rev. 5)

      Thixotropic epoxy putties for leveling concrete surfaces and for structural...

    • CP 40 

      Super fluid epoxy resin for impregnation of DCI Wrap with “wet system”

      PRODUCT IDENTITY
      Component A Component B
      Consistency: liquid liquid
       

      Color:

      transparent yellow transparent yellow
      Specific gravity (g/cm³): 1.12 1
      Brookfield viscosity (mPa·s): 380 (shaft 1 – rev. 5) 50 (shaft 1 – rev. 50)

      Super fluid epoxy resin for impregnation of DCI Wrap with “wet system” ...

    Start typing and press Enter to search