Primer D is a one-component adhesion primer based on acrylic resins.
Primer D
It is used to prepare smooth, absorbent, and non-absorbent substrates before applying the tile adhesive products such as DCI Linoleum, DCI Carpet, etc and, self leveling compounds.
Product Description
Field of Application
· For treating gypsum surfaces before installing waterproofing products.
· As an anchoring coat for gypsum-based spray plasters.
· To improve bonding of smoothing compounds on cementations or anhydrite and gypsum-based surfaces.
· To provide uniform absorption in cementations or gypsum surfaces.
Product Details
Product identity
Consistency: liquid
Color: White
Density (kg/m³): 1100
Viscosity (mPa.s): 350
Dry solids content (%): 30
PACKAGING
Primer D is supplied in:
– 1 kg plastic can
– 5 kg plastic can
– 10 kg plastic can
COVERAGE / CONSUMPTION
The consumption of PRIMER D depends on the porosity and absorption of the surface. Typical consumption is between 100 and 200 gr/m².
Application Procedure
Preparation of substrate
The substrate should be dry, clean, and free from grease, oils, residual paint, and other loose material. In each case, the manufacturer’s recommendations for gypsum-plaster must be followed, particularly as far as moisture content and level of surface finishing are concerned. Cracks in concrete surfaces must be repaired with Epoinject. Anhydrite surfaces must be sandpapered.
Preparing the product
Ready to be used.
Applying the product
Stir the PRIMER D before use; spread it uniformly on the surface with a flat brush or roller without diluting it. If the gypsum plaster surface is particularly smooth and glossy, it is recommended to rub it beforehand. Once it has dried, install the tiles.
Primer D 