PU Cleaner

PU CLEANER is a solvent-based cleaning solution supplied in spray cans.

Product Description

It may be used either manually, by inserting a cylindrical nozzle into the valve on top of the spray can, or by screwing the spray can to the collar of Gun. The solvent-based solution contained in the can, which also contains CFC-free gas propellant that is harmless to the ozone layer, is released from the can by pressing on the feed nozzle or by squeezing the trigger of the sealant gun.

Field of Application

To remove traces of wet PU Foam by spraying surfaces, tools, equipment and work clothes with the special cleaning solution and to remove traces of wet foam from inside the feed circuit of sealant guns by screwing the container of cleaning solution to the sealant gun.

Product Details

Product identity

Consistency: liquid
Color: transparent
Density (kg/m³): 800
Dilution: Ready to used
Application temperature: +5°C to +35°C

PACKAGING

PU CLEANER is supplied in:
– 500ml can

Application Procedure

Preparing the product

Ready to be used.

Applying the product

Shake the can while holding it upside-down (with the feed valve facing the bottom) at least 25 times to mix the contents and propellant together. Manual use: insert the cylindrical nozzle supplied with the can into the valve on top of the can. Hold the can upside-down at all times while spraying and point the nozzle towards the surface to be cleaned until the traces of foam to be removed have been dissolved/softened. Remove the traces of foam immediately with a clean rag. With a sealant gun: screw the can to the gun so that it is attached to the gun in an upside-down position. Squeeze the trigger of the gun and spray for a few seconds until only the cleaning solution comes out of the gun with no traces of foam. Unscrew the can from the sealant gun and place it in an upright position (feed valve at the top). Spray any traces of solution from the sealant gun so that the feed circuit of the gun is completely empty.