Revital Color is a specially designed additive for use with tile grouts to improve the chemical and mechanical resistance. Revital Color is used in place of water to provide a dense, colorfast grout joint that inhibits stain causing bacteria, mold and mildew growth. Ideal for all interior and exterior grout applications.
· For interior and exterior installation
· For walls and floors, wet and dry applications
· For use with Portland cement to make slurry bond coats for mortar beds
· Suitable for use in swimming pools and facades
All surfaces must be mechanically hard, clean, and free of all dirt, paint, grease, concrete sealers, or remaining products. Cementitious screed, plasters, and renders must be cured (28 days for cement screeds, 7 days per cm of thickness for plasters). Expansion joints shall be provided through the finishes from all construction or expansion joints in the substrate. Screeds and cement mortar beds that are particularly absorbent or subject to overheated by the sun must be saturated without leaving water on the surface.
The mixing water of tile grouts is replaced with Revital Color until a final homogenized product is achieved. Then, the product is applied according to the description given on the product data sheet.
1 Jake Brown Rd, Old Bridge, Nj 08857, United States
info@dc-industries.us
+1 55 12 258 428
Revital Color