Ready-to-use water based acrylic putty with thermal effect, suitable for stuccoing (skim coat puttying) in interior areas.
Product Description
Field of Application
Thermal Stucco is ideal stuccoing surfaces of plaster, concrete, masonry, wood, gypsum board and cement board
Product Details
Product Identity
Base: Acrylic Copolymer
Form: Pasty
Color: White
Density: 0,70±0,02 gr/m
Consumption: 0.5 kg/m2
Touch drying time: 1 hour
Drying time for recoating: 3±½ hours (Drying and recoating time may be prolonged under conditions of low temperature and high relative humidity)
Drying time for sanding: 24 hours
Adhesion strength: ≥ 0.5 MPa
Flexural strength: 600 N
VOC (Volatile Organic Compounds): Limit value for this product Category Α/a “Interior matt walls and ceilings (Gloss<25@60ο)”: 30g/l (2010). The product contains max. 29g/l.
PACKAGING
10 Kg plastic buckets
Application Procedure
Application method: Spatula
Diluent: Ready for use
Surfaces must be clean, dry and free from all defective and poorly adhering material, dust, dirt, oils and salts. Mix well before application. The
product applied by trowel using a dragging technique in two coats. The second coat follows after the first has dried. After stuccoing, the final surface
is smoothed out by sand paper in order to be primed and then painted. Tools are cleaned immediately after the application with water.
THERMAL STUCCO 