Cement Base Flooring

Chem M250 Rapid is a special hydraulic binder, which, when mixed with clean aggregates and water, has the properties to harden in a few hours and to dry perfectly at whatever thickness within 24 hours. Because of these characteristics and the very high mechanical strength, Chem M250 Rapid is the ideal binder for screeds onto which resilient, textile, wood, ceramic or stone floorings must be installed within 24 hours.

Flatex S 03 is a grey powder composed of special cements, selectively graded silica sands, synthetic resins and blended admixtures. Flatex S 03 mixed with water forms a thixotropic paste that is easy to spread on floors or walls. It can be applied in thicknesses up to 5 mm per coat. When hardened it has good resistance to compression, flexion, and abrasion. For greater thicknesses, add 30% clean, suitably graded sand. To improve the mechanical characteristics of Flatex S 03 for more critical applications we recommend partially replacing the mixing water by adding 1.5-2 kg of Latex or Admix S2 for 25 kg bag of product.

Level S50 is a special cement-based screed mortar with fluid consistency and controlled shrinkage. It is used for quick drying screeds, suitable for use in interior civil and commercial applications. Level S50 is classified as CT – C40 – F10 – A9 – A1fl in compliance with EN 13813 Standards.

Screed 80 is a special cement-based screed mortar with fluid consistency and controlled shrinkage. It is used for quick drying screeds, suitable for use in interior civil and commercial applications. Screed 80 is classified as CT – C40 – F10 – A9 – A1fl in compliance with EN 13813 Standards.