Mortars
Showing 17–32 of 63 results
-
EPO FLAT ST
Read moreBi-component, epoxy-based stucco for smoothening concrete structures before reinforcement with carbon fabric.
-
Epo Grout 3C
Read moreThree-component fluid epoxy mortar for anchorage work
-
Epo Grout 3C Plus
Read moreThree-component free-flowing high-strength rapid hardening epoxy grout applied in layers up to 10 cm thick for anchoring and grouting structures
-
Epo Inject Bar100
Read moreTwo-component fluid epoxy resin for anchoring steel bars
-
Epo Inject HV3
Read moreEpo Inject HV3 is a solvent-free epoxy adhesive consisting of two pre-measured components, component A resin, and component B hardener that have to be mixed before use. Epo Inject HV3 has the liquid consistency that can be applied by brush on both horizontal and vertical surfaces. Epo Inject HV3 polymerizes without shrinkage and, after curing, is waterproof, possesses excellent dielectric properties and high mechanical characteristics in addition to its ability to bond concrete and steel. Epo Inject HV3 meets the requirements defined by EN 1504-9 “Products and systems for the protection and repair of concrete structures.
-
Epo Inject LV1
Read moreEpo Inject LV1 is a solvent-free epoxy adhesive consisting of two pre-measured components, component A resin, and component B hardener that have to be mixed before use. Epo Inject LV1 has the liquid consistency that can be applied by brush on both horizontal and vertical surfaces. Epo Inject LV1 polymerizes without shrinkage and, after curing, is waterproof, possesses excellent dielectric properties and high mechanical characteristics in addition to its ability to bond concrete and steel. Epo Inject LV1 meets the requirements defined by EN 1504-9 “Products and systems for the protection and repair of concrete structures.
-
Epo Inject MV3
Read moreEpo Inject MV3 is a solvent-free epoxy adhesive consisting of two pre-measured components, component A resin, and component B hardener that have to be mixed before use. Epo Inject MV3 has the liquid consistency that can be applied by brush on both horizontal and vertical surfaces. Epo Inject MV3 polymerizes without shrinkage and, after curing, is waterproof, possesses excellent dielectric properties and high mechanical characteristics in addition to its ability to bond concrete and steel. Epo Inject MV3 meets the requirements defined by EN 1504-9 “Products and systems for the protection and repair of concrete structures.
-
EPO PRIMER ST
Read moreTwo-component solvent free epoxy primer for consolidating of concrete structures
-
Fixativ 2K
Read moreTwo-component cementitious repairing mortar with low modulus of elasticity for the repair of concrete
-
Fixativ C50
Read moreStructural R4-class, Normal-setting thixotropic mortar for repairing deteriorated concrete
-
Fixativ C50 Fast
Read moreStructural R4-class, Normal-setting thixotropic mortar for repairing deteriorated concrete
-
Fixativ C75
Read moreStructural R4-class, rapid-setting, shrinkage compensated, thixotropic, fiber-reinforced, mortar, applied in a single layer from 10 to 50 mm thick, for repairing and smoothing concrete
-
Fixativ Easy 2K
Read moreTwo-component, thixotropic, fiber-reinforced, cementitious mortar with a low modulus of elasticity and added organic corrosion inhibitor for repairing concrete, applied in a single layer at a thickness of from 3 to 20 mm
-
Fixativ R3
Read moreMedium strength, shrinkage-compensated, fiber-reinforced, thixotropic mortar for repairing concrete
-
Fixativ R4
Read moreSulphate-resistant, fiber-reinforced shrinkage compensated thixotropic mortar for the repair of concrete
-
Fixativ R4 Fast
Read moreFast setting shrinkage compensated thixotropic mortar for cortical restoration of concrete by applying a single coat of mortar at a variable thickness between 1 and 40 mm
