Betoform F5 is oil based ready to use form release agent which provides complete release of concrete or grout from metal or wooden formwork. It does not stain, extends the life of the formwork and provides a good quality aesthetic concrete finish.
Product Description
Field of Application
▪ Form release agent for steel,Aluminum or wooden formwork
▪ Providing a good quality aesthetic concrete finish
▪ Extending the life of formwork
Product Details
Product identity
Composition: Oil
Appearance: Liquid
Colour: Yellow
Density: 0.85 kg/Lt at +20°C
PACKAGING
Betoform F5 is supplied in:
– 1 kg plastic can
– 5 kg plastic can
– 10 kg plastic can
– 1000 kg plastic can
COVERAGE / CONSUMPTION
- Wooden formwork ~20–30 m2/L
- Metal or plastic formwork ~40–50 m2/L
Consumption depends on the absorbency, surface porosity, roughness, surface profile, variations in level or wastage etc.
Application Procedure
Surface preparation
All surfaces to be coated must be clean and free from dirt, dust, grease and any remaining concrete or grout residue. Steel formwork must be dry. Used formwork must be cleaned before.
Application
Ensure full mixing before applying. Apply a single, uniform and continuous thin layer on the full area of dry or damp formwork using a brush, roller or spray equipment. For architectural aesthetic concrete finishes, consumption may need to be adjusted. A preliminary trial must be carried out before full application in all situations.
Betoform F5 