Betoform W12 0 is a ready to use, solvent and mineral oil free concrete release agent. It is an emulsion, based on biological degradable vegetal oil.
Product Description
Field of Application
▪ Smooth non-absorbent formwork
▪ Absorbent formwork
▪ Heated formwork
▪ Textured formwork
Product Details
Product identity
Composition: Oil
Appearance: Liquid
Colour: White
Density: 0.85 kg/Lt at +20°C
PACKAGING
Betoform W12 is supplied in:
– 1 kg plastic can
– 5 kg plastic can
– 10 kg plastic can
– 1000 kg plastic can
COVERAGE / CONSUMPTION
- Wooden formwork ~120–130 m2/L
- Metal or plastic formwork ~140–150 m2/L
Consumption depends on the absorbency, surface porosity, roughness, surface profile, variations in level or wastage etc.
Application Procedure
Surface preparation
All surfaces to be coated must be clean and free from dirt, dust, grease and any remaining concrete or grout residue. Steel formwork must be dry. Used formwork must be cleaned before.
Application
Ensure full mixing before applying. Apply a single, uniform and continuous thin layer on the full area of dry or damp formwork using a brush, roller or spray equipment. For architectural aesthetic concrete finishes, consumption may need to be adjusted. A preliminary trial must be carried out before full application in all situations.