Emulsion paint of excellent quality for general interior use
Product Description
Field of Application
Interior surfaces of plaster, concrete, brick, wood, stucco, gypsum board, plastic etc.
Product Details
Product Identity
Resin: Acrylic Copolymer
Density (white): 1,60±0,02 gr/m
Production viscosity (white): 110±5 KU 23ºC
Storage viscosity (white): 110±7 KU 23ºC
Spreading rate: Up to 9m²/lit for each coat
Dry through(white): 20±10 minutes
Recoating time (white): 50±10 minutes
Dry through (shades): 30±10 minutes
Recoating time (shades): 2±½ hours, (Drying and recoating time may be prolonged under conditions of low temperature and high relative humidity
Shades: Available in white and in thousands of shades via the deutschcolor tinting system (dcts). It can be tinted also with dc basics emulsion colorants.
VOC (Volatile Organic Compounds): Limit value for this product category α/a “interior matt walls and ceilings (gloss<25@60ο)”: 30g/l (2010). The product contains max. 29G/l.
PACKAGING
3lt / 9lt / 15lt plastic buckets
Application Procedure
Application method: Brush, roller, airless spray
Diluent: Water
Water demand: 10-15% v/v Surfaces must be clean, dry and free from all defective and poorly adhering material, dust, dirt, oils and salts.
Hansa Spachtel/ Spachtel Elastisch: For filling, where ever is necessary
Macht Haftgrund: Thinned 100-300%, for sound surfaces without coherence problems
Macht Tiefgrund Wasser: Thinned up to 100%, for very porous surfaces or surfaces already coated with lime or low quality chalky paints
Picasso J’adore: Directly, for the refinishing of sound surfaces Picasso J’adore is applied in 2 coats. Tools are cleaned immediately after the application with soap and water
PICASSO J’ADORE 