Seal Primer is a one-component adhesion primer based on acrylic resins. It is used to prepare smooth, absorbent, and non-absorbent substrates before applying waterproofing products such as Aquaprotect, Seal Master, Seal Master Elastic, Aquashield, etc.
Field of Application
• For treating gypsum surfaces before installing waterproofing products.
• As an anchoring coat for gypsum-based spray plasters
• To improve bonding of smoothing compounds on cementations or anhydrite and gypsum-based surfaces.
• To provide uniform absorption in cementations or gypsum surfaces.
COVERAGE / CONSUMPTION
Preparation of substrate
The substrate should be dry, clean, and free from grease, oils, residual paint, and other loose material. In each case, the manufacturer’s recommendations for gypsum-plaster must be followed, particularly as far as moisture content and level of surface finishing are concerned. Cracks in concrete surfaces must be repaired with Epoinject. Anhydrite surfaces must be sandpapered.
Preparing the product
Ready to be used.
Applying the product
Stir the SEAL PRIMER before use; spread it uniformly on the surface with a flat brush or roller without diluting it. If the gypsum plaster surface is smooth and glossy, it is recommended to rub it beforehand. Once it has dried, install the tiles.