V 3500 is white, non-flammable, ready-to-use, water dispersion adhesive for bonding fabric and glass fiber wall coverings
Product Description
Field of Application
· For bonding on walls and ceiling glass fiber mesh
· For bonding on walls and ceiling non-woven fabric
Product Details
Product identity
Consistency: pasty
Color: white
Bulk density (kg/m³): 1050
Viscosity: 120,000 (7 rotor - 5 rpm)
Dry solids content (%): 25
pH: 8
PACKAGING
V 3500 is supplied in:
20 kg plastic bucket.
5 kg plastic bucket.
COVERAGE / CONSUMPTION
Approximately 0.1-0.25 kg/m2 depending on dilution and application techniques.
Application Procedure
Preparation of the substrate
The substrates must be cured and sufficiently dry, mechanically strong, free from loose particles, grease, oils, paint, wax, etc. During spring and summer, renders must be cured for at least one week for every centimeter of thickness, unless they have been made with DCI special binders for walls. Gypsum substrates must be perfectly dry (max. residual moisture 0.5%), sufficiently hard, and dust-free. They must be treated with Primer Seal. It is not recommended to apply adhesive on substrates until hydraulic shrinkage is complete and the substrate has residual humidity lower than 4%
Preparing the product
V 3500 ready to be used.
Applying the product
Mix the adhesive before use if necessary. Spread the adhesive on the surface with a roller. When bonding heavy mesh or fabric, it is better to apply the adhesive with a fine notched trowell. Lay the mesh or nonwoven fabric on the fresh adhesive while the adhesive is still fresh and carefully place the mesh. Wait 24 hours before painting.
V-3500 